Fix Paintball Gun. If you play paintball on a regular basis, it’s likely that at some point your gun will break down. While finding someone who can fix your gun can be tricky, doing it yourself is pretty straightforward. Luckily for you, we’ve got the step-by-step process you need to follow.
Take your gun apart – Fix Paintball Gun
Take your gun apart. Remove the slide and barrel, then separate the slide from the frame. Separate the trigger assembly from the rest of the frame. Remove the internals by taking out the mainspring housing and the mainspring, then the hammer and trigger.
Clean each part with a solvent.
Clean the paint! There are a few things to pay careful attention to. Clean the barrel of any liquid before priming or painting, and clean the slide of any excess primer prior to running the colors. You will need access to a hole punch just to get at the vacuum system in the action, so make sure you get there before you start priming or painting.
Replace the parts inside the housing. In the action, the fermenters that collect gunk and dirt inside the slide connecting the barrel to the frame are typically put into the housing under the slide. Not to be confused with peepholes, these are single loose screw threads that are free to move around a soft material.
A loose fit will cause paint to run down the exterior of the slide, and will also cause the connection between the housing and frame to be loose.
Put the new parts back together. It is imperative that there is no slack or plays in the connections between the parts or paint will not stick where it is supposed to, which can lead to paint leaking out of the space.
Priming The finish of the paintball gun is determined by the type of paintball primer used. Most commonly found are flat black or flat gray, these are much more consistent with each shot. Flat primer is also far easier on the paint so you will typically be able to push less paint out with each shot.
Prevent gunk from sticking.
Repair the trigger – Fix Paintball Gun
If you want to break the cycle and stop procrastinating, you’ve got to repair the trigger. The trigger is what starts the whole procrastination cycle. It’s the one thing that sets you off and makes you want to procrastinate. In order to end the cycle, you need to identify your trigger and then repair it.
Oliver has been a paintball enthusiast since he first stepped on the field at just 11. He quickly joined clubs and teams all throughout New Hampshire! He started Paintball Hive to share his passion and knowledge with other paintball heads out there!